The Cargo Tape King: Reviewing Gorilla Glue Products

Okay guys, this week the unthinkable has happened; I've broken my axe handle. Now I could drop down and use it the way it is, but I am not going to get any work done. The best course of action would be to replace or repair the handle using Gorilla tape, and maybe even a little Gorilla glue. I wanted to test and see if something like this happened, if I could repair it or if I would have to completely rehang it. Would this be the end of my camp, or could I get this tool to hang on just a bit longer until I could properly repair it? Now this isn't going to be like other reviews we have done in the past. This review is not just on one product, but instead on the Gorilla brand itself and how its products work together.

The products I will be using are the Gorilla Crystal Clear Tape, Gorilla Glue (the same glue I used in the fire starting video), and some black Gorilla Tape for grip. What I am going to do is use the glue to bond the handle back to itself. The bottle states that this glue will bond to wood which is what we need it to do so I am going to be careful to follow the instructions on the bottle.After having it set, I am going to bind the handle with the clear tape about to inches above and two inches below the fracture, similar to when I make sewing repairs. Lastly, I will use the black tape and a grip where my hands will hold the axe to prevent it from slipping while I am working.

To apply the glue you first wet the area that you will be applying the glue to and spread it thin. I did this for the axe handle and spread the glue with a stick. After making sure the two pieces of handle adequately fit together I used to crystal clear tape to bind it in three places across the fracture; the top, middle, and bottom. By doing this it helps clamp the two sides together so they can bond together. I also took apart my chair (which will be featured another time) and laid one piece on the ground, sandwiched the axe between it and the top piece, and used a large rock (though you could use any significantly weighted object like your pack, a large branch, etc...) to place on top of it, again to clamp the two broken pieces together. After letting this sit for two hours, I will come back to check on it.

After two hours, I notice that some of the Gorilla glue has come out of the sides of the break. This is a good thing.  What this means is that the handle had enough pressure on it for the glue to spread out inside the fracture. At this point I wrap the Gorilla crystal clear tape in one continuous wrap from two inches above the break to two inches below. Afterward, and this is an optional step, I used my mini cargo tape roll (the black tape) to create a nonslip grip for my hands. After a few good test swings on a very sturdy tree, I'm convinced that the Gorilla products have done their job.

And that does it for this week. I want to thank everyone reading this for going through this with me and I would also like to think Gorilla brand products. They did not sponsor me or ask me to do this review, but without them I don't think this repair would have been possible. Next week we will be starting on our last C: cotton, and you won't want to miss it! As always feel free to comment by clicking the comment link at the end of the blog, hit the follow button in the top right corner, share this blog, and check back next week for a new one on Sunday 10pm (est). If you want to keep up with me and what I’m doing, Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Lastly if video is more your style check out my YouTube Channel backpack bushcraft where there is a video version of this with the same title. Until next time, keep those fires burning and put another log on for me.