This Little Lamp of Mine: A Review of UCO's Collapsible Lantern

Last week we wrapped our candle selection video and I said that we would be reviewing another candle lantern that I purchased this week. This lantern is light, compact, super tough, and the candles themselves are very powerful. I am of course talking about UCO's collapsible candle lantern. This lantern is 6" tall, 4" when collapsed, and there are two main parts to it. There is the candle chamber and the lantern body itself. The lantern's body has a 3" long, 1.5" wide glass globe, the body of the lantern which is just a bit bigger than the globe that has a peep hole in it so you can see how much candle you have left, and the top of the candle which fits into the grooves of the body, a cap to protect against weather, a bell, and a chain. The chain is a bit annoying because it gets caught on everything. When assembling the body of the lantern make sure you line up the fingers of the lid with the grooves of the body and slowly slide it into place. Once it is fully collapsed you want to make sure you get each finger around the glass globe at the bottom. If you go too quickly you could scratch the globe or break one of the fingers of the lid.

Now let's move on to the candle chamber.  This is made up of the candle shell, a spring and a plug. There is also a cover plate for the spring to protect it from melting wax. To assemble, insert the candle into the candle chamber wick first. Then you are going to find the cover plate and insert it concave side first. Next take the spring and the plug and carefully put it behind the candle. You don't want it to spring back on you. Once everything is fit together you will take the candle chamber and insert it into the body of the lantern and twist to lock it. Now, you can light the candle in the candle chamber prior to putting it in the lantern, or, you can slide the globe down, light the candle, and slide the globe back up into place and lock it.

We will be repeating the same tests from last week with this candle. First we will try to light this candle with a spark, with charcloth, and the candle itself. This was the first candle I was ever able to catch with a spark. Let me explain what happened. So I lit the charcloth and had my ember going and I held the candle over the embers and some of the wax melted into the charcloth. When I noticed this I started to blow harder to get the ember to melt that wax and get it to release the gas that keeps the candle burning. Once I got that to happen and it started to create a flame, it was as easy as holding the candle to it and lighting it. Honestly, now that I know what I'm doing I think I could light any candle this way, but I have to give it to the survival candle for being the first.

Next is the illumination test. This candle claims to have 20 lumens, but I am mainly going to see how well it lights up my area and we will take it down to the track and see how well we can read the signs. This lantern is very similar to the electric lantern in its ability to light up my work area. I estimate it to have about a 5 foot area of illumination. I could very easily be doing something at night at my camp with this lantern on hand. On the track I had to get about 1 ft away from the sign to be able to read it, however, I didn't have to be right up on it like I did with the other candles, so I'll give it props for that. I will say that it has done much better than the other candle lanterns I've made, but I do think I can improve them. Since I haven't yet I'll give it to this candle. The only problem I have is that it didn't do as well as I wanted it to on the track, however, UCO makes a cup that looks like it may be for this lantern that covers the back and makes the light more concentrated in one spot. Honestly, I always carry a flashlight with me, but it may be something  you're more interested in for your kit.

Now we will be doing a burnout of this candle. It claims to burn for 9 hours. This candle burned for 13 hours and 40 minutes. I lit the candle at 3 pm and it didn't go out until 4:40 am. It was a long night. This is more than double the time its competitor the squat candle burned.

On to field repair. The only concerns I have are with the glass globe or the fingers of the lantern body. If the globe were to crack, I'm not sure how well this lantern would work. The globe puts pressure on the fingers and the fingers put pressure on the body to hold everything in place. With the globe gone, it's uncertain how well your lantern will actually work. The second thing I worry about are the fingers. If one finger breaks the whole system will be unbalance and will likely not work. Now I don't think they are so flimsy that they will just snap, but I do think you could easily break one if you are being careless while inserting your globe. This lantern is made out of stainless steel and is pretty sturdy. As long as you keep maintenance on it, it should last you a long time. This is another point I want to make. It's not necessarily about field repair, but it is a relevant point. The only candles that will work with your UCO lantern, is a UCO candle. Surprising right? You MIGHT be able to get by with a stick candle, but no other candle will fit.

Now onto our price point. Before telling you the price, I will say that this lantern has been so much fun to work with and use. I highly recommend you get one and try it out if you have the scratch. The lantern itself is about $17 and comes with one candle. I also purchased a set of $3 candles for about $8 so I spent about $25-26 total. There is a combo pack with these items that I've seen for between $21-23 on Amazon (it changes daily). In hindsight I should have done that, but, oh well. For $8 you get 3 candles which equals out to about $2.66 per candle. If you subtract $2.66 from the $17 for the lantern you get the base price for the lantern which is $14.33. For $14.33 I could make 3, maybe 4 of my candle lanterns including the tools I need to make them. This is if you are going for quantity, not quality. You could also make my candle lanterns a lot brighter by adding more holes, I just don't like to do that. Now for $2.66 I could buy 5 squat candle that give me 30 hours of lighting. for a full $8 which will give me 3 UCO candles, I could buy 15-16 squat candles and get 90-96 hours of lighting. Now that is a lot more candles I will have to carry with me. And yes, I understand that the UCO candles are more expensive because they are smaller and more powerful, I'm just playing devil's advocate to show you what options you have.

In the end I don't think I will be packing this in my bush kit, mostly because of the fears I have with field repair. I do think this would be good for an ultra light backpacking kit (which I am going to make eventually), maybe a hunting kit, and definitely an EDC kit. This won't be going into my EDC kit because as you know, mine is filled to the brim and cannot accommodate it. But another point I want to make is that my bush kit is designed around higher quantity and not higher quality. That's just a sacrifice I'm willing to make. But that'll do it for this year. We will have a Christmas special next week, though. You won't want to miss it! As always feel free to comment by clicking the comment link at the end of the blog, hit the follow button in the top right corner, share this blog, and check back next week for a new one on Sunday 10pm (est). If you want to keep up with me and what I’m doing, Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Lastly if video is more your style check out my YouTube Channel backpack bushcraft where there is a video version of this with the same title. Until next time, keep those fires burning and put another log on for me.