Beads You Can Count On: Making Ranger Beads to Aid With Navigation

Last week we talked about binoculars which are a best friend to the compass and did some survival drills with them at our local park. This week, we are going to be making a craft that is going to help us keep pace a little better on the trail, and that craft comes in the form of ranger beads. I will be showing you how to make these, as well as making ranger beads entirely out of paracord, and talking about the different kinds of ranger beads you might encounter. Lastly we'll be heading to a local walking track where I will be practicing with my ranger beads and trying to learn my pace. Let's get started.

What are ranger/pace beads? They are beads on a piece of paracord, or string, whichever you prefer, and you move the beads up once you have gone a certain distance to keep track of how far you have walked. I actually have two sets of ranger beads, one is set up to mark kilometers, and the other is set to mark miles. We will be going over the kilometer beads first because this is the one most people prefer, and are also the true ranger beads because they go by clicks. On the bottom set you have 9 beads that represent 100 meters each. After you have walked 100 meters, you will push up a bead until you have pushed up all 9 beads, which is 900 meters. Once you reach 1000 meters, you will then push up one of the 4 beads on the top set, which is one click. You will then reset your bottom set of 9 beads and start over. The mile beads are set up similarly except you have 6 on one leg, and 7 on the other. The set of 7 beads represent 1/16 of a mile each. once you have reached 8/16 of a mile and have no more beads, you move up one of your 6 beads which represents 1/2 a mile each.


If you are walking with the mile marker beads, you will be able to count 3 and just about half of a fourth mile. If you are walking with the kilometer beads, you will be able to count 4 and just about a 5th kilometer. Either way, both sets are made up of 13 beads total. If I wanted to convert my kilometer beads into mile beads, I simply undo the knot separating the two sets of beads, move two up from the set of 9 into the set of 4, and I now have a set of 7 and a set of 6. I will then re-tie the knot, being careful to leave an even amount of space and not tying it too tight so that I can't undo it later.

Now I used wooden beads for mine, but you can use regular beads if you like. My problem is, I don't especially like the beads. I notice that they tend to slip, some of them in particular are really bad for it. I wanted to make a set that wouldn't slip and I didn't want to have to worry about buying more beads. I got the idea from a video (How To Tie Paracord Ranger Beads Method 1) and the guy actually tied his paracord into beads and attached them that way. I went in a bit of a different direction with it. I simply took strips of paracord and tied them into a normal overhand knot. They slide well along the paracord they are tied off to, and they actually hold in place really well where I slide them. For my paracord ranger beads I have a set of 6, a set of 7, and a third set of 4 that I'll talk about here in a minute. Whether you have 4 and 9 or 6 and 7, you will sometimes find a set of 4 beads at the bottom called forester beads. The forester beads are meant to keep track of every 20 meters OR 22 yards. Sometimes when you walk through the woods your pace may be uneven due to the terrain, so you can use the forester beads to mark those distances. Once you move up all four forester beads, you can move up your first 1/16 of a mile marker, or your first 100 meter marker.

Let's talk about how to make one of your own. First take your length of paracord and tie a loop into the top of it. This loop serves as your means of tying it to your pack, belt, walking stick, etc. To make a loop fold your paracord over, give yourself some distance, and tie it off. Now, I like to use two different colors of paracord for this, but now I am going to start adding the strips that will be my counters. to do this, I wrap a new color of paracord around the original that we just tied a loop in, tie an overhand knot, dress it as tight as I can, and then cut it as close as possible to the knot with a knife or scissors. You will repeat tying off the strips of paracord until you had 13 beads total. Then you could separate them however you wanted, and tie a knot off between them. The next thing we need to do is some prevention to keep the ends from fraying. What I have done is taken a lit candle and held the ends of

the paracord I cut close to the flame. You do not actually have to get it into the flame or catch it on fire. If you do, just blow it out gently, no harm done. You just want to melt down the edges of the mantle and the inner string. This will keep the paracord from fraying and falling apart so you get the most use out of your ranger beads.

Our next mission is to head to our local walking track and use the ranger beads to get my pace put in. I have with me on my walk my ranger beads, a pedometer, and a paper that tells me how many steps I need to take to complete 1/16 of a mile depending on my stride. Your stride is the distance you  clear within 2 steps. Based on this, it should take me 83 steps to walk 1/16 of a mile.

After pushing up all of my forester beads I am now ready to push up my first 1/16 of a mile bead. Now it looks like I'm off this first time and was going a bit too fast so I'll try again. The problem I had was that the steps I was counting and the pedometer were not syncing up. When I should have been 1/12 of a mile in, my pedometer said I was 1/10 of a mile in. So what I tried next was resetting everything on the pedometer and trying again while watching the pedometer. Based on the pedometer it took me about 125 steps to clear the 1/16 of a mile. If I divide that into 5 for the forester beads, I'm looking at moving up a bead every 25 steps so that is something I will have to keep in mind. When I began my nature walk I counted 25 steps, moved a forester bead, and repeated that process. The trail I walked was supposed to be about 1.2 miles. At the end I think I may have been a bit overzealous. I had 1 6/16 of a mile and 44 yards. Overall my pace may still need some work to get it accurate.

It is now that time again where we add another item to our pack. This week isn't very difficult as the paracord ranger beads as the only item I used. I'm simply going to attach this to a loop that is on the right shoulder strap of my pack because I am right handed. The only problem I had was the loosening of the paracord strips. I myself am not too worried about it as I can just tighten them down, melt them in to place, or if worse comes to worse I can just replace it even in the field. Next week we will be doing a review of an all in one option, you don't want to miss it. As always feel free to comment, hit the follow button in the top right corner, share this blog, and check back next week for a new one on Sunday 10pm (est). If you want to keep up with me and what I’m doing, Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Lastly if video is more your style check out my YouTube Channel backpack bushcraft where there is a video version of this with the same title. Until next time, keep those fires burning and put another log on for me.