Trails With Ole Nick: Making the Square Tarp

Trails With Ole Nick: Fire Making on an East KY Ridge

Sealing the Deal: Making Repairs With Cargo Tape

Last week we talked about the fire starting abilities of cargo tape and this week we will be moving on to the true reason that it is a part of the 10 C's. That reason is its ability to repair in the field. We are still using Gorilla brand cargo tape and that is the only brand of cargo tape that I will use.




Whether you are repairing your tarp, there is something wrong with your pack such as a broken strap, or turned it into a rope like Kirk Miller did (link here: https://www.youtube.com/watch?v=wgJ0z...), or even if your shirt got a rip, you could repair it really quickly with cargo tape. I'll show you how.

You want to start by getting a length of cargo tape that is roughly a quarter of an inch longer above and below the rip; this can be longer depending on your preference. This actually works really well with denim, but because I didn't want to rip my good pants, we will just be working with a cotton t-shirt. So all I am going to do is pull the fabric taut, fold the tear over on itself, and seal it with the cargo tape being sure to smooth out any wrinkles as this will weaken the bond. Now the tape does not stick to my skin and no wind is able to get through the fabric. Of course we can all agree that this is a temporary fix, but this can be a quick solution to the problem until you have time to sit down and repair the fabric with needle and thread.

Now let's say you got injured.What I have seen some people do is take a small section of cargo tape and tear it in half. They will start on one side of the wound and pull over to the other side and seal it down. Then taking the other half of the cargo tape start on the opposite side than what you started on with the other piece of tape and repeat the process. I have even seen some people take a larger section of tape and cover up the the smaller pieces of tape and the entire wound. On the contrary I have also seen people saying not to do this because the wound needs to breathe. I am not an expert by any means so you may want to do more research into this topic. If there is a way you prefer to do it, leave me a comment and tell me!

We have now repaired our shirt, we've repaired ourselves, and my pack currently does not need repairs. Now we are going to move on to the reason I carry cargo tape the most; repairing the tarp. So I have just cut a small hole near the corner of my tarp. I am going to do this the same way that I repaired my shirt. I am going to get a piece of cargo tape long enough to go about a quarter of an inch above and below the tear and seal it down. I am now going to go onto the back side of  the tarp and do the same thing. Now if you happen to do what I did and did not get a long enough piece of tape, no worries. Just get another section of tape and overlap where the previous piece stopped and pull it the rest of the way over the tear. This should  make it water type and we will test it out. All I have done to test is to stake the corner near the rip up so I can see the ground beneath it and poured water directly over the cargo tape. After doing this, the ground beneath the tarp was still dry as was the inside of the tarp, making this a successful repair.

That does it for this week! Next week we will be doing a cargo tape review and you won't want to miss it! As always feel free to comment by clicking the comment link at the end of the blog, hit the follow button in the top right corner, share this blog, and check back next week for a new one on Sunday 10pm (est). If you want to keep up with me and what I’m doing, Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Lastly if video is more your style check out my YouTube Channel backpack bushcraft where there is a video version of this with the same title. Until next time, keep those fires burning and put another log on for me.

Trails with Ole Nick: Tarp Setup on an East KY Ridge

Bumbling Bushcraft Comic: Tarpigami

It Was My Last Resort: Cover Option and EDC Kit Packed Away

Last week we talked about the second characteristic of a good EDC kit, as well as added a 17 oz. stainless steel water bottle and 60 ft. of bank line. If you would rather use paracord, I added two other options for paracord, so definitely check out last week’s blog to learn more about those. Our EDC kit is currently valued at about $40. This week we will be talking about the last characteristic as well as adding cover to our kit and packing it away. Lastly we will do a grand total value of our kit and I’ll tell you what I actually spent on it.

The third and final characteristic is re-usability. Re-usability is important for any piece of gear in your EDC kit as well anything you use and like the other two characteristics, gives you two distinct advantages. The first is that reusable items are going to be cost effective. In a world where we have emergency tents and disposable ponchos that are great when you need them and have them, once they are used that piece of gear is gone and has to be replaced. I would rather have a good, higher quality item that I pay more money for and be able to reuse it, This does not just apply to cover options. Matches are one and done while lighters can be reused over and over again. Sure, a single match costs less than a penny, but lighters are a onetime purchase, are compact, and even after they run out of fuel you can still cast sparks off of it. The magnifying glass is easily the most cost effective item in my kit because I use the power of the sun to start a fire.

The second distinct advantage is that these items can be used outside of an emergency. I know this goes against what I said. This is an emergency kit, not a camping kit, however, if you’re going to have this kit on you all day you would be foolish not to use it in your daily routine. I usually have some sort of situation every day that involves a knife. You may use your lighter to light a cigarette for a friend, use you magnifying glass to read a restaurant menu, use your 11-in-1 Card to open bottles or cans, or even use your bottle to provide your own drinking glass at a friend’s house.

Now for our cover option. This item like everything else was chosen because it is familiar to me, it is compact, and it is reusable. My cover option is going to be a reusable poncho that I’ve had for about a year. It has stood up to a lot of rain and a lot of football games, but still has a lot of life left in it. The poncho covers most of my body and I like that the sides unbutton turning it into a serape. Having my ends open leads me to believe that I can them off and fly the poncho like a tarp. On the other hand I can wear it with the sides buttoned up and bring my arms in. The poncho will keep out the rain and cold and help me to retain body heat. If it gets too bad, I can draw string the hood and cover my face more.

The poncho alone is not enough for me in the way of cover, I still need some kind of moisture barrier. I am also going to add some black contractor bags to my kit. You may remember them from my three day camp. I actually chose to pack two. The second can be used as a spare, but can also serves several other purposes. I can fill it with water which will save energy from going back and forth to collect water for my water bottle. I can fill it with leaves to make a bed, I can use it like a sleeping bag, and I can even cut the sides and fly it like a tarp if my poncho were to fail. We also talked about re-usability outside of an emergency situation. The poncho is obvious, but with some careful cutting the contractor bags can be come two more ponchos for two more friends.

Now where will we be storing this gear? I considered using a backpack, but it was too bulky. I thought a haversack might be nice, but I couldn’t get my hands on one. So after looking for an option I found a water-resistant, neutral colored, low key pack to store my EDC kit. I chose…a fanny pack.

 Now, it’s not my favorite option, but it does everything I need it to. It easily stores all of my gear and even has a pouch in the front so I can get to the gear I need the fastest. I have considered using something more military that would appear more like a tactical fanny pack that would cost between $20-$40. However I was trying to be cheap. Once I set up camp I will even have room in the fanny pack to carry my tinder or anything else I collect.

Now it’s time to value out the kit. The poncho cost me $5. The garbage bags came in a pack of 10 for $10. With two in my pack that adds another $2 making our cover value a total of $7. The fanny pack cost $10 and was the only item I actually purchased for my EDC kit. All other items I had or was already using. This brings our total value up to $57. Again the only item I purchased was the fanny pack so its more accurately $10 spent and $47 collected.

Next week we will be testing the EDC kit I put together against the store bought EDC kit. I know I’m excited and you won’t want to miss it! As always feel free to comment, hit the follow button in the top right corner, share this blog, and check back next week for a new one on Sunday 10pm (est). If you want to keep up with me and what I’m doing, Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Lastly if video is more your style check out my YouTube Channel backpack bushcraft where there is a video version of this with the same title. Until next time, keep those fires burning and put another log on for me.

It’s not homework: 5 blogs I recommend you check out

Last week I told you guys I would more than likely be taking this week off to rest and recharge, and I am currently doing that. However, I thought this would be a good time to recommend just 5 blogs for you to check out. These blogs have been picked for their contents and how it will pertain to the next blog series to come out, but more on that later. Also these blogs will provide you with a lot of insight to the previous series “The 3 day camp” and the reasons I choose the tools I did. Now you could of course check out all the blogs, though if you don’t have that kind of time, just check out these 5.

First off from our combustion series I have to recommend “Cloth roasting on an open fire”.  In this blog I made char-cloth a key component to next fire mentality. Not only that, but it was also a nice wrap up to the entire series. After the char cloth was made I performed a few observations on it. I learned that super-hot char-cloth will begin its embering process if a gentle breeze is present. This make sense because of the 3 facts for fire which are heat, fuel, oxygen. The fuel is already super-heated turning it into char then in the presents of any airflow it begin to ignite. Lesson learned about letting your char-cloth cool before using it. So make sure you check this blog out before next week

Following next was my container series. During this time I spent a lot of times working with mess kits. Even going so far as to make my own. However, the first blog was about your water bottle and its importance. At the time there wasn’t much I could do in the way of an activity for this blog so it turned about to be a lot of lecturing. However, some important points came from there like “My criteria for a Bushcraft water bottle” as well as “what your water bottle should do for you”. Definitely want to check those out so you know which bottle to keep and which to pitch.

 

Speaking of “pitching”, a blog called “pitch the tent and use a tarp” came from

the cover series. In this I used my square tarp that I had made from a rectangle tarp in the previous blog, to demonstrate different set-ups and flys that can give you great shelter options. Never in a million years did I think I would recommend a tarp over a tent. However, my problems with tents like: heat, moisture, and claustrophobia; these aren’t a problem in the tarp. And with a good moisture barrier and some bug repellent would could get all the benefits of a tent without the downsides.

Next in the cordage series, I wrote a blog called “time to get a little knotty”. This entire series was plagued with puns and I apologize for that. However, I do recommend this blog because it shows you the different knots that your cordage should be able to do for you. In this blog, I highlighted 5 or 6 different knots with included a fishing knot and a hitch knot, which lead in to the lashing blog the most popular blog on the website. Definitely will be important so check it out.

Finally in the cutting tool series I have to recommend “Sharpest tool in the shed”. Not only was it our first video episode. But it was the longest blog in process. I very proud of this review. The cutting tools shown in this blog all have specific purposes and different way of tackling a problem. I recommend this one, because knowing what each tool “can do” and “can’t do” will make more sense for the choices I’ll be making in the next series. However, that’ll have to wait till next week.

Now as for the series itself it will be on EDC kits. I will be going explain the importance of EDC kits and the problem I have with most of the ones I see. If ya want a Sneak-peak then here it is: NO PLASTIC BOTTLE. As always feel free to comment, hit the follow button in the top right corner, share this blog, and check back next week for a new one on Sunday 10pm (est). If you want to keep up with me and what I’m doing, Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Lastly if video is more your style check out my YouTube Channel backpack bushcraft where there is a video version of this with the same title. Until next time, keep those fires burning and put another log on for me.

Rub-a-Dub-Dub the Bushcraft Tub: Day 2 of the 3 Day Camp

Last week we talked about day 1 of the 3 day camp where we set up the tarp, did some cooking, and went to sleep for the night. Today we will be talking about Day 2 of the 3 Day camp. A couple of things I want to talk about first; during the night my mattress deflated. I continued to sleep on it as it served as a secondary moisture barrier. I also used my boots as sort of a headboard and place to rest my head and it actually helped make me much more comfortable and give me a better night’s sleep.

To start the day I enjoy a breakfast of canned fruit cocktail and some water that I had purified the night before. The fruit can has a pull tab, however if it were to fail, I have my Camillus Trench to open the can with. The goals for day 2 are to collect more firewood to make another good fire tonight, and also to go over some basic camp hygiene.

I checked the nearby trees for dead, dry branches that I could use for firewood. I can tell how dry they are by how easily they snap. Once I found a good bough, I took it from the tree and brought it back to my camp to be processed.

For lunch I ate the bread that I had made on the campfire the night before as well as some Slim-Jims. I would like to add that if you are taking Slim-Jims, or any other kind of jerky with you into your camp, have water. These food items are cured and quite salty and can make you very thirsty. This is why I didn’t have any Slim-Jims the night before. My water was still too hot to drink and I could have easily become dehydrated.

At this point during the camp it begins to rain. I decided to take advantage of this in a few ways. I have a large bough that I took down from a tree that needs to processed into firewood and kept dry so I decided to use this time to do that. The smaller kindling pieces I broke down and stored in my large bowl from my mess kit and the larger pieces that would be used as fuel I sat to the side near the back of the tent. Another way I took advantage of the weather is trying to harvest rain water. I used my empty fruit can to collect the water in. I took my bandana and set it on top of my tarp. Once it became saturated with water, it dripped into the can. I didn’t collect much, but it was something.

Once the rain stopped I started my campfire. There is no need to make more bread tonight since I will be going in after breakfast in the morning so I am going to do something a little different with my fire tonight. For starters I decided to try cooking my soup out of the can rather than in my mess kit. Next I also took some water and placed it in my large bowl and began to heat it over the fire to wash myself down with. Once the water is heated I get one of my washcloths wet and when it has cooled to a tolerable temperature, I wipe myself down with the cloth. It’s no shower, but it is refreshing after being in the hot, humid weather all day.

My fire is burning out and there is not much left for me to do. I figure now it is best to pack up as much as possible so when it is time to go home in the morning, I really only need to take down my tarp and pack up my bedroll. I make sure that I wash out the pieces of my mess kit and dry it as best as I can before I pack it and put it away. When I get home, I can actually put it in the sink and wash it a bit more thoroughly.

Well that’s about it for day 2. I hope you have enjoyed this blog. Next week we will be packing up the camp and talking about how to take care of our gear after we come in from the outdoors, as well as what I might do differently next time. As always feel free to comment, hit the follow button in the top right corner, share this blog, and check back next week for a new one. Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. If video is more your thing, check out my YouTube channel Backpack Bushcraft or just click here to watch now. Until next time, keep those fires burning and put another log on for me.

Settling In and Cooking Out: Day 1 of the 3 Day Camp

Last week I showed you all of the gear items that I have chosen for this camp, some of them we had talked about, but some were personal items I had chosen that we had not previously discussed. I showed you how I packed my pack, and now we are ready for the 3 day camp. This week we will be talking about the first day of camp from the time I walked out the front door, to the time I went to bed for the night. Let’s get started.

For the first night I need to accomplish a few things. The first and most important thing is setting up my camp. Next I will need to collect some firewood and some water. Then I can build a fire at my camp site that I can use to boil my water and cook my food for the night and some for the next day as well. I need to try and get all of these tasks accomplished before it gets too dark that I cannot see to work, or that I will be too tired to do anything else.

For my camp I will be using my bedroll to assemble the wedge, or plow point tarp set up that we had talked about in a previous blog. I have chosen this set up because there is a possibility it could rain during the three days I am out here and it will provide the most space and cover. Another bonus is that it is the fastest to set up and also to tear down. After getting my tarp set up, the next thing I am going to do is place the industrial size garbage bags in my bedroll on the ground to provide a moisture barrier not only for myself, but for my gear to rest on while I go gather firewood and water.

I collected my water from the nearest source which was my garden hose and stored it in the canteen that I packed in my pack. This water may not be unsafe, but according to the rules of my camp, I will be treating it as an unsafe source and will boil it over my fire later on in the camp before I drink it.

Now for gathering firewood. Tinder and kindling are easy enough to process as they can be broken up by hand. The fuel is much thicker so I will be using my hatchet to process it. To do this I take the wood I will be processing and place it on another piece of wood so there is space between the ground and the branch. This protect my blade from hitting the ground and damaging it. 

To get my fire started I lay some fuel branches on the ground, placed some tinder on top and placed a piece of charcloth in the tinder. I could cast sparks with a ferro rod but for this instance I just chose to use my Bic lighter. Once the charcloth was alight I layered in tinder, kindling, and then fuel until the fire had taken off on its own. 

At this point I am ready to start cooking. The first order of business is to get my water boiling. I can boil it in the canteen itself by placing it close to, almost in the fire. Next I am going to take out my mess kit. I used the larger bowl to pour my soup in and used my tripod to get the bowl into the fire enough to begin warming the soup. I used the smaller bowl in my kit as a mixing bowl and started making pancake batter for my lunch on day 2. I used a couple of spoonfuls of flour, a few pinches of sugar, a bit of salt, a scoop of shortening and some of the water I had purified to make the batter. I also used some shortening in the flat pan in my mess kit to grease it as the plan was to use it as a griddle. In the end my bread did stick to the pan. It wasn’t pretty, but it was edible. After dinner I needed to get my mess kit cleaned up for the next day. I simply took the pieces of it over to the garden hose and sprayed out the contents.

Now it is time for bed. The first thing I need to do is inflate my inflatables. First is the mattress which is a large pool float. Next I have four arm floaties that I inflated and stuffed into a pillow case that I used for a pillow. To keep them from shifting around I pack them in the way I want them and then tie off the excess length of the pillowcase to keep them in place. Lastly I have my wool blanket that I will cover up with. After my fire is out, I am ready for bed.

I hope you have enjoyed this first day of camp. Tomorrow is a new day with a new set of goals and new challenges to face. As always feel free to comment, hit the follow button in the top right corner, share this blog, and check back next week for a new one. Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. If video is more your thing, check out my YouTube channel Backpack Bushcraft or just click here to watch now. Until next time, keep those fires burning and put another log on for me.

All Packed Up and Ready to Go: Packing For the 3 Day Camp

We’ve spent the past few months talking about all different types of gear that fall under the category of David Canterbury’s 5 C’s of survivability, why they are important, what options you have, and comparing and contrasting those options. This week I am going to pack a backpack full of some of that gear we’ve discussed and go out on a 3 day camp using only the items I’ve packed. 

Now I have set up some rules for this camp and they are as follows: 

1. Once I have left the house I am not allowed to go back inside for any reason whatsoever. (No going back for forgotten or broken gear, restroom needs are an exception to the rule.) 
2. I will be treating all of my water which I will obtain from a garden hose as if it is an unsafe source and follow all of the necessary steps for purifying it. 
3. I will only be using gear that we have talked about in the last six months of blogs with the exception of one item.

Now, let’s get into what is actually going into the backpack. First I want to talk about food items. I have packed with me canned goods such as soup, which I can heat over my fire in my mess kit or in the can itself, and fruit cocktail which is quick and easy for breakfast and does not need to be cooked. Both of these canned items have a pull tab on top for convenience. I also have with me a flour kit with flour, sugar, salt, and coffee, which I can use to bake bread over my fire. Lastly I have brought some Slim-Jims along as a snack or to be paired with my other meals.

I have chosen these items because if I work strategically I can get most of my cooking done over one fire and that is less work for me. For example, once I have set up camp and started a campfire, I can boil my water, cook my soup for dinner, and bake some bread for lunch the next day. In the morning I will have my fruit, lunch will be premade, and I will have no further need for a fire until dinner time the next day. This way I get the most out of my resources.

The next personal item I will be talking about is a medicine kit that I have put together. I purchased a medicine organizer and sorted out allergy medication, ibuprofen, multivitamins, and sleeping pills. I chose these as I figured they would be what I would most likely need outside. Honestly, the sleeping pills will likely be the most useful to me on this trip as I will likely have trouble falling asleep on the ground so I anticipate needing them at least for the first night.

The last two personal items I will be taking are some simple dish cloths and some insect repellent. The cloths will be used for cleaning or drying out my mess kit, cleaning my gear, other hygiene needs, and maybe even to wrap my bread in to keep bugs out. The insect repellent is for the mosquitos which are awful this time of year. I purchased the sportsman max and have been left completely alone by these little pests after using it.

Now that we’ve gotten the personal items out of the way, we will talk about the gear I have chosen to take with me, starting with my backpack. I have chosen the Arrowhead bucket pack from Outdoor products. It has two side compartments, a compartment in the front, a larger and smaller compartment on top and the inside is one large compartment large enough for a bucket which I have inside. I chose this pack for the simplicity and how easy it is to pack, which I will show you how to do now.

First is the bucket in the main compartment. Truthfully this is more useful for an extended stay in the bush with such uses as a seat, latrine, or washing bucket, but for my purposes it will just make my pack sturdier.

Now a good rule of thumb for packing a bucket pack is to place the items you will need sooner than later on the top. My food items I won’t need until after camp has been set up and I have a campfire going so it will go on the bottom. This includes my canned goods, flour kit, and Slim-Jims. Next I will add my medicine kit and dish towels.

These next items which will be closer to the top of my pack fall under the category of the 5 C’s. I have chosen the mess kit that I put together myself that we talked about in a previous blog as well as a water bottle that I can boil water in. The mess kit consists of two large bowls, one with a rounded bottom and one with a flat bottom that can be used for frying. There is also a smaller bowl that I can use as either a cup or a mixing bowl. I also have included a tripod to cook over my campfire, a vice grip for taking my bowls on and off the fire without burning myself, and lastly, a fork and a spoon to eat with.

Next is my cordage. I have about 10’ of 555 paracord and a large roll of 36

bank line. Now, I have other cordage with specific purposes spread throughout my kit. This is more for backup in case I have forgotten something or something goes wrong. If needed I could use either of these items to set up my tarp or for my tent stakes.

I have several options in the way of cutting tools. I have my hatchet for processing wood, the Camillus Bushcrafter which I have as my fixed blade knife, a folding saw, and the Camillus Trench for my pocket knife. Now typically these items would go on my belt and they will in the field, but for now they can be stored in the pack. The folding saw is used for processing wood with a larger diameter down to a manageable size to be split with my hatchet. The Trench has various uses such as a can opener in case the pull tabs on my canned goods fail, or any fine carving tasks such as making feather sticks. Finally the Bushcrafter will fill in for any equipment for tasks such as splitting or carving.

I want to take a second to talk about the combustion kit I will be taking with me as well. The container for my fire-starting items is a chocolate covered pretzel can that I have spray painted and drilled a hole in so I can make charcloth. Its content are a piece of flint, some charcloth, a ferro rod, two bic lighters, and a magnifying glass. The magnifying glass comes with a simple cover with cloth on the inside so you are wiping away debris when you put it away.

Lastly is my bedroll which we made in a previous blog. This will serve as my cover. It consists of an 8x8 tarp that we had made, a wool blanket, and other essentials. I will be placing my bug repellant in the top of the pack so when I step outside I can spray myself down and I will be ready to get started. I hope you are as excited as I am to see what these items can do over a three day span. As always feel free to comment, hit the follow button in the top right corner, share this blog, and check back next week for a new one. Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. If video is more your thing, check out my YouTube channel Backpack Bushcraft or just click here to watch now. Until next time, keep those fires burning and put another log on for me.

1 2 3 Start Lashing with Me: Basic Lashing Knots and How to Use Them

The answer to last week’s blog was the Cove Hitch. What it goes to is lashings, as I’m sure you can tell by the incredibly punny title I chose to use this week. Now before we get into lashings, I want to give you reassurance that they are not going to be nearly as bad as you have them set to be in your mind. Before I did this blog, I was very nervous to try lashing for the first time, mostly because of what they are used for, such as chairs, rafts, shelters, meat poles (what you hang animal carcasses off). Once I watched a few videos from, Eastmans' Hunting Journals, I really began to learn that lashings are as easy as 1, 2, 3. Before we get into lashings and all that stuff, let’s go over the clove hitch.

Clove Hitch Knot

To perform the Clove Hitch, you are only concerned with the working end in your right hand (I like to leave out about a foot). Lay the working end over what you are tying the hitch to, in this case a piece of wood and wrap once crossing over the top of the working end, really focusing on make the X-shape that is essential to the Clove Hitch. Take the working end all the way back around and feed it underneath the X that the two strands make and cinch it tight. We use the Clove Hitch because regardless of whether you pull on the working end or the static end, this knot does not come loose unless you pick it apart. I remember it as being called a Clove Hitch because it is split like the hooves of an animal such as a cow.

Before we go into square lashing, I just want to talk about the terminology real quick. You’ll need to know that when I say “wrap” I mean to place the cordage in a particular pattern based on which lashing we’re doing. And the “frap” which is wrapping the wrap to strengthen and tighten.

Square Lashing Knot

To begin our square lashing, we first want to begin by placing a Clove Hitch slightly off center (I chose off right to the center) on one of our lashing poles. For this lashing, I am going to be lashing a 1 1/2” diameter branch to a 4” diameter tree. I can go in any pattern that I want, but what I mainly want to do is wrap BEHIND the pole in the back and in FRONT of the pole in the front. You want to keep it as tight as you possibly can. After each pass, ratchet it down. Once I have done this three times, I want to begin the frap. With this, I want to wrap around the cordage in the space between my two lashing poles. Again, crank down as tight as you can after each pass. I watched a video that said that this can be as tight as steel spikes if done correctly. I end it with another clove hitch after my final frap. This should secure it onto the pole without loosening it all.

Diagonal Lashing Knot

This lashing is very similarly constructed to the square lashing. The only differences are instead of going around the pole, you go in between them, and instead of starting with a Clove Hitch, you start with a Timber Hitch. So go ahead and tie that Timber Hitch. You want to tie it diagonally on the lashing poles. Next you want to wrap three times in whatever original direction you started with the timber hitch, which itself does not count as a wrap. Next you want to wrap in the opposite plane going in the other direction diagonally for another set of three wraps. Next you want to frap again three times around the cordage in the space between the two lashing poles. At the end I tie off with a Clove Hitch, and again I am done. While I haven’t tested it, I do theorize that one could do the Timber Hitch in one diagonal, then instead of wrapping that diagonal, wrap the opposite diagonal, then come back and wrap the same diagonal as the Timber Hitch. I believe that it would give this more stability. I have not been in a place where I could really test my theory out, so anyone who could help me out with an answer to that, please leave a comment below.

Tripod Lashing Knot

The last lashing is called the Tripod Lashing. A lashing that every woodsman should know, especially if they plan on cooking via a tripod. For this lashing, you will need to again tie a Clove Hitch onto whichever pole is to the far right, a little bit below the top. Next you will want to wrap the other poles in a weaving pattern. To do this, start from the Clove Hitch and go under the middle pole, around the leftmost pole, over the middle pole, and around the rightmost pole, and so on until you have about five wraps on the outermost poles. Make sure that each weave is tightened down. Next you want three fraps around the cordage in between the poles. To stand it up, take the middle pole and pull the bottom of it backwards while pushing the tops of the outermost poles together at the top. This will form your tripod.

Sort of a shorter blog this week. There are other lashings out there and we may go over them again in the future if that’s something you guys would like. Also, we may try our hand at making furniture with these lashings, but that will be another blog. Next week we will be going over the cordage review. It seems that this month has just flown by. As always feel free to comment, share this blog, and check back next week for a new one. Follow me on Facebook: @BPackBushcraft and on Twitter @BPackBushCraft. Until next time, keep those fires burning and put another log on for me.